Installation: Large Hole Cover
Installation Instructions: Large Hole Cover
-Step 1: Locate holes to be covered
-Step 2: Place Large Hole Cover centrally over the hole
-Step 3: Mark pilot hole positions
-Step 4: Drill 5mm pilot holes
-Step 5: Screw fix with Tapcon 6 x 45 Concrete Screws
-Step 6: With the Hole Cover fitted the trip hazard is eliminated
Caution: Any damaged / loose Hole Covers must be immediately replaced / securely fixed
Notes: Do not use shot fixings to secure the cover. We recommend fixing with Tapcon Countersunk Concrete Screws 6 x 45mm [Screwfix.com ref: 76958]. This fixing method requires a 5mm pilot hole / no plastic plug required (as they self cut a thread into concrete) ref to www.constructionfixings.com/Assets/pdfs/tapcon.pdf for the Tapcon Technical Data Sheet. We advise caution in the use of shot fired fixings due to the risk of Hole Cover damage during installation. Any loose / damaged covers must be replaced immediately.
Contact Us
For more information, call Beresford's Flooring Ltd on 0845 347 5537 today.
Alternatively you can email us using the 'Contact Us' form or visit our main website via the link to the side of this page.
The number one choice or Hole Covers across the UK
